Projects
Solutions
Services
News
About Us
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
YCH7-125 ac dual battery electrical Isolation ...
General
YCH7-125 series isolating switch is suitable in the resistive circuit of AC 50/60HZ,ratedvoltage 230/400V,rated current up to 125A.
It’s used primarily forcircuit’s turning on or off in non-load edsituation.And it functions onconnection and isolation between lines and power,especially suitable to isolate powereffectively and prevent circuit breaker from dosing accidentally when maintainthe circuit inorder to ensure the safeoperation of maintainer
Standard:IEC600947-3
Contact Us
Product Details
General
Feature
Contact position indication
Anti-skid handle for easy and reliable operation
Flame retardant,high temperature resistance and impact resistance
Technical data
| Model | YCH7-125 | ||
|
Electrical features |
Poles | P | 1,2,3,4 |
| Rated voltage Ue | V | 230/400 | |
| Rated current le | A | 20,32,40,63,80,100,125 | |
| Rated frequency | Hz | 50/60 | |
|
Rated impulse withstand voltage(1.2/50)Uimp |
V | 4000 | |
| Rated short-time withstand current Icw | 12le,1s | ||
| Rated making and breaking capacity | 3le,1.05Ue,cosφ=0.65 | ||
| Rated short circuit making capacity | 20le,t=0.1s | ||
|
Dielectric test voltage at ind.Freq.for 1min |
Kv | 2.5 | |
| Insulation voltage Ui | V | 500 | |
| Pollution degree | 2 | ||
| Use Category | t | AC-22A | |
| Mechanical features | Electrical life | t | 1500 |
| Mechanical life | 8500 | ||
| Protection degree | IP20 | ||
| Installation | “Terminal size top/bottom | mm² | 50 |
| for cable and pin-type busbar” | AWG | 18-1/0 | |
| Operating Conditions |
Ambient temperature(with daily average≤35℃) |
-25～+60 | |
| Altitude | Not higher than 2000m | ||
| Installation Method | Embedded vertical standard rail mounting | ||
| Wiring Method |
Clamp connection wire with screw,tightening torque 2.5N.m |
||
Overall and mounting dimensions(mm)
Data Download
Related Products
-
GW1-12G(D) Isolation SwitchSelection -
GN19-12 Indoor isolation switchGN19-12 Indoor isolation switch GN19-12 indoor MV isolation switch series MV switch equipment used for rated voltage 10kV, AC 50Hz and below power system, equipped with CS6-1 type manual operating mechanism, open, close the circuit in the case of no load, voltaged. There are derivatives such as anti pollution, high prototype and added charged display device type, etc. Technical data Model Rated voltage (kV) Maximum voltage (kV) Maximum current (A) 4S thermal stability current (kV)... -
YCHGL-63~3150A Isolation SwitchService environment 1. YCHGL load-isolation switch can operate under the following conditions 2. Altitude not more than 2000m; 3. The range of ambient temperature is from -5℃ to 40℃; 4. Relative humidity not more than 95%; 5. The environment without any explosive medium. 6. The environment without any rain or snow attacking. If the product is expected to be used in the environment where temperature is over +40℃ or below -5℃, user’s shall tell it to the manufacturer Conformed standard...
-
Phone：86-577-61989999
-
Email：cncele@cncele.com
-
Address：CNC High-Tech Hutou Industrial Zone, Liushi Town, Yueqing, Wenzhou Ctity, China
Hot Products - Sitemap
3 Phase Starter, Mpcb, 250amp Mccb Circuit Breaker, 3p Ac Mcb, 6a Elcb, Mccb Microprocessor Based,