China SCBH15 Series dry type power electric what is a substation electrical station transformer types supplier Manufacture and Factory

Product Overview
Product Details
Data Download
Related Products

SCBH15 Series dry type power electric what is a substation electrical station transformer types supplier

Picture

SCBH15 Series dry type power electric what is a...

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln

Product Details

SCBH15 Series Amorphous Alloy Dry-type Transformer

SCBH series amorphous alloy dry-type transformer is a dry-type transformer with low loss and high energy efficiency. Its no-load loss is more than 70% lower than that of traditional transformers using silicon steel sheets as iron cores.

It is a new generation of energy-saving, safe, green and environmentally friendly high-tech products. This product can replace ordinary dry-type transformers, and is mainly suitable for high-rise buildings, commercial

centers, infrastructure, industrial and mining enterprises, power plants, etc.

Standard:IEC60076-1, IEC60076-11.

Selection

Operating conditions

1. Ambient temperature: Maximum temperature:+40°C,Minimum temperature:-25℃ .

2. Average temperature of the hottest month:+30℃,Average temperature in the hottest year:+20℃ .

3. Altitude not exceeding 1000m.

4. The waveform of the power supply voltage is similar to a sine wave.

5. The three-phase supply voltage should be approximately symmetrical.

6. The relative humidity of the surrounding air should be lower than 93%, and there should be no water droplets on the surface of the coil. 7. Where to use: indoors or outdoors.

Features

1. Low loss, good energy-saving effect, and economical operation.

2. Flame retardant, fireproof, explosion-proof and non-polluting.

3. Good moisture resistance and strong heat dissipation.

4. High mechanical strength, small partial discharge and high reliability.

5. Short-circuit resistance, high level of lightning impact, and large overload capacity. 6. Small size,lightweight, small footprint, and convenient installation

Structure

■ Iron core:

● The iron core is made of amorphous alloy material and adopts a three-phase three column structure.

● The iron core is suspended on the reinforced insulation board on the upper part of the coil, which is completely free from external force, and fully utilizes the characteristics of low no-load loss and low no-load current of the
amorphous alloy material, and the energy saving effect is obvious.

■ High and low voltage winding:

● The high and low voltage adopt rectangular winding, and the inner and outer layers are filled and wound with glass fiber mesh and glass ribbon, which are permeated and solidified with resin,and have strong resistance to cracking and
sudden short circuit.

■ Simple and beautiful structure:

● The transformer adopts a frame type clamp structure, and the coil is compressed by elastic compression nails, resulting in a simple and beautiful overall structure

■ Advanced technology:

● Using vacuum film degassing, metering pump, static mixing and other advanced technologies,Ensure the proportioning accuracy and pouring quality of the epoxy mixture.

● The HTC winding adopts advanced "airway rod" technology,Not limited by the curvature radius of the winding, one or more axial air ducts can be set at the heating center of the winding according to design requirements to achieve the

best heat dissipation effect of the entire machine,Simultaneously, multiple supporting ribs can be generated in the air duct, effectively enhancing the mechanical strength of the winding.

SCB15 technical data

Rated capacity (KVA)	Voltage combination			Connection group label	No-load loss(W)	Load Loss(w) 120℃	No-load current (%)	Short circuit impedance(%)	Dimensions			Total weight (kg)
Rated capacity (KVA)	High voltage (KV)	Tapping range	Low voltage (KV)	Connection group label	No-load loss(W)	Load Loss(w) 120℃	No-load current (%)	Short circuit impedance(%)	L	W	H	Total weight (kg)
30	6 6.3 6.6 10 10.5 11	±5 ±2×2.5	0.4	Dyn11	70	710	0.6	900	800	300	900	4
50					90	1000	0.5	955	900	350	900
80					120	1380	0.5	985	960	400	950
100					130	1570	0.5	1035	980	450	1250
125					150	1850	0.4	1060	1000	500	1280
160					170	2130	0.4	1120	1050	680	1320
200					200	2530	0.4	1135	1105	770	1330
250					230	2760	0.4	1170	1165	900	1330
315					280	3470	0.3	1185	1225	1010	1360
400					310	3990	0.3	1210	1300	1205	1380
500					360	4880	0.3	1245	1380	1400	1400
630					420	5880	0.3	1295	1355	1515	1410
630					410	5960	0.3	1295	1355	1515	1410	6
800					480	6960	0.3	1375	1480	1880	1450
1000					550	8130	0.2	1430	1525	2170	1480
1250					650	9690	0.2	1480	1570	2525	1500
1600					760	11730	0.2	1500	1710	2980	1520
2000					1000	14450	0.2	1570	1735	3480	1550
2500					1200	17170	0.2	1625	1825	4080	1600
1600					760	12960	0.2	1500	1710	2980	1520	8
2000					1000	15960	0.2	1570	1735	3480	1550
2500					1200	18890	0.2	1625	1825	4080	1600