Solutions
Support
News
About Us
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
S-100W, S-120W Power Supply
Picture
S-100W, S-120W Power Supply
1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
Conatct Us
Product Details
S-100W
S-100W
Single output: power 100W
Input voltage: 90~132VAC/180~264VAC by switch
Technical data
| Model Specification |
S-100-5 | S-100-12 | S-100-18 | S-100-24 | S-100-36 | S-100-48 |
| DC output voltage, current | 5V 0~20A | 12V0~8.5A | 18V0~5.5A | 24V0~4.5A | 36V0~3A | 48V0~2A |
| Wave and noise | 75mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p |
| Inlet wire stability | ±0.5% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | ±0.2% |
| Load stability | ±0.5% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | ±0.2% |
| Efficiency | 78% | 81% | 84% | 84% | 84% | 84% |
| Adjustable range for DC voltage | ±10% | ±10% | ±10% | ±10% | ±10% | ±10% |
| Input voltage range | 90~132VAC/180~264VAC by switch 254~370VDC 47~63Hz | |||||
| Impact current | Cold start current 30A/115VAC 60A/230VAC | |||||
| Overload protection | 105%~150% cut off the output, automtic recovery | |||||
| Over voltage protection | ||||||
| Setup, rise, hold up time | 200ms, 50ms, 20ms/230VAC at full load | |||||
| Withstand voltage | I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute | |||||
| Isolation resistance | I/P-O/P I/P-FG O/P-F/G: 500VDC/100MΩ | |||||
| Working temperature | -10℃~+50℃ | |||||
| Dimension | 199×98×38mm | |||||
S-120W
S-120W
Single output: power 120W
Input voltage: 90~132VAC/180~264VAC by switch
Technical data
| Model Specification |
S-120-12 | S-120-15 | S-120-18 | S-120-24 | S-120-36 | S-120-48 |
| DC output voltage, current | 12V 0~10A | 15V0~8A | 18V0~6.7A | 24V0~5A | 36V0~3.3A | 48V0~2.1A |
| Wave and noise | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p |
| Inlet wire stability | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | ±0.2% |
| Load stability | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | ±0.2% |
| Efficiency | 81% | 82% | 84% | 84% | 84% | 84% |
| Adjustable range for DC voltage | ±10% | ±10% | ±10% | ±10% | ±10% | ±10% |
| Input voltage range | 90~132VAC/180~264VAC by switch 254~370VDC 47~63Hz | |||||
| Impact current | Cold start current 30A/115VAC 60A/230VAC | |||||
| Overload protection | 105%~150% cut off the output, automtic recovery | |||||
| Over voltage protection | 115%~135% shut down O/P voltage ,re-power on to recover | |||||
| Setup, rise, hold up time | 200ms, 50ms, 20ms/230VAC at full load | |||||
| Withstand voltage | I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute | |||||
| Isolation resistance | I/P-O/P I/P-FG O/P-F/G: 500VDC/100MΩ | |||||
| Working temperature | -10℃~+50℃ | |||||
| Dimension | 199×98×38mm | |||||
Write your message here and send it to us
Data Download
Related Products
-
MS-35W, S-35W Power SupplyMS-35W MS-35W Single output: power 35W Input voltage: 180~264VAC 120~370VDC Technical data Model Specification MS-35-5 MS-35-12 MS-35-15 MS-35-24 DC output voltage, current 5V 0~6A 12V 0~3A 15V 0~2.4A 24V 0~1.5A Wave and noise 60mVp-p 80mVp-p 100mVp-p 100mVp-p Inlet wire stability ±1% ±0.5% ±0.5% ±0.5% Load stability ±1% ±0.5% ±0.5% ±0.5% Efficiency 77% 81% 83% 84% ... -
DR Power SupplySingle output DIN rail power supply Summary single output: power 75W Input voltage: 85~264VAC 120~370VDC General Specification 55.5 × 125.2 × 100mm Model Specification DR-75-12 DR-75-24 DC output voltage, current 12V 0~6.3A 24V 0~3.2A Wave and noise 100mVp-p 150mVp-p Inlet wire stability ±0.5% ±0.5% Load stability ±0.5% ±0.5% Efficiency 76% 80% Adjustable r... -
CJ19i(CJ19s) ContactorProduct Structure General CJ19i contactor for capacitor switching (hereinafter called contactor) is suitable for the circuit of AC 50Hz/60Hz with rated rated voltage up to 690V. It is mainly used to add low voltage reactive power compensation equipment or cut off low voltage parallel capacit... -
H3CR-A8 Time RelayItem No. Data Voltage DC12V-48V AC24V-220V 50HZ Power Consumption DC1.0W AC1.0VA Control Output 5A 220V AC Insulation Resistance DC500V 100MΩ Dielectric Strength BCC1500VAC BOC1000VAC Operating Temperature -10℃~50℃ Humidity 35%~85% Life Mech:107 Elec:103 Weight ≈160g Installing Hole Size 45×45mm Time range ... -
MDD Cold-pressed TerminalConductor cross-section: 0.5-1.5mm2; American Wire Gauge: 22-18; Maximum current: Imax=15A; Model NEMA TAB Material thickness Size(mm) Color B dΦ DΦ L H MDD2-187 0.5*4.75 0.5 4.75 2.3 4.3 20 10 Blue MDD2-250 0.8*6.35 0.4*2 6.35 2.3 4.3 21 Conductor cross-section: 4-6mm2; American Wire Gauge: 12-10; Maximum current: Imax=24A; Model NEMA TAB Material thickness Size(mm) Color B dΦ DΦ L H MDD5.5-250 0.... -
XMT □ -7 Temperature ControllerGeneral 7 □□□ series(REX series) intelligent digital display temperature controller adopts the latest plane touch operation and microcomputer control technique. Based on the principle of simpleness, convenience, stability and reliability, this series instruments have great adaptability to the market, and it complies with the international standard and has various installation size. The series intelligent digital display temperature...
Copyright © 2022 CNC ELECTRIC GROUP CO.,LTD. All Rights Reserved.
Hot Products - Sitemap
6a Elcb, Mccb Microprocessor Based, 3p Ac Mcb, 250amp Mccb Circuit Breaker, Mpcb, 3 Phase Starter,
Hot Products - Sitemap
6a Elcb, Mccb Microprocessor Based, 3p Ac Mcb, 250amp Mccb Circuit Breaker, Mpcb, 3 Phase Starter,