KYN28A-12 indoor metal clad movable switchgear is a complete power distribution device for 3.6kV~12KV,3 phase AC 50/60Hz,single bus sectionalized system.It is mainly used for power transmissionof middle/smallgenerators in power plants,powerreceiving,transmission for substations in power distribution and power system of factories,mines and enterprises etc.so as tocontrol,protectand monitor the system.
Standard.IEC62271-200

Rating
Rated voltage 12/24KV,rated current reachto 630A.
Application:
mainly applicable in urban power grid features and renovation project,industrialand mining enterprises,high-rise buildings andcommunal facilities.For power distribution,controlling and protection on electric equipment as the looppower supply unit orterminal equipment.It also can be installed in pre-loaded substation

Rating:Rated voltage:380V. 50-60Hz
Application:
mainly applicable in power station,power substation industrial and mining enterprises as energy converter,distributor and controller of power,light and distribution device.
Standard:IEC60439-1

Application:mainly applicable in places with high automation andneed to communicate with computer like large power stationand petrochemistry system,as the low voltage distribution device of the distribution and motor controling,and reactive powercompensationin power system.

MNS low-voltage withdrawable switchgear is suitablefor power systems with an AC 50Hzand a rated working voltage of 400V.Itis mainly used for energy conversion,distribution,and control of distribution equipment.
Mainly suitable for airports,power stations,transportation and energy,industrial and mining enterprises,residential communities.and other places.
Standard:IEC439

The XL-21 low voltage powerdistributioncabinet issuitable for three-phase four-wire systems with ACvoltages up to 500V.It isprimarily used for power distribution purposes in power plants,industrial and mining enterprises,high-rise buildings,andotheroccasions
The XL-21 low-voltage power distribution cabinet is securely wall-mountedand allows for front-panel maintenance and inspection.

Operating conditions
1.Installation Site:Indooror outdoor;
2.Atitude:No more than 2000m.
3.Earthquake Intensity:No more than 8degrees.
4.Ambient Temperature:No more than +40℃andno lessthan-25℃Averagetemperature is no more than +35℃within 24 hours.
5.Relative Humidity:the average daily value is no more than 95%,the averagemonthlyvalue is no more than 90%
6.Installation locations:without fire,explosion danger,serious pollution,chemical corrosion and violentvibration.

General
Grounded socket TMS-5 issuitable for single-phase power supply,used in theauxiliary AC circuit for connecting electrical appliances(portable lamps,powersupply,etc.).
Standard:IEC60884-1.

In daily electricity usage, the direct hazards of high voltage include accelerated aging of electrical equipment insulation and reduced lifespan. If the voltage exceeds a certain range, it can directly burn out electrical appliances such as TVs, DVDs, stereos, and more, with severe cases leading to equipment damage or even fire hazards. On the other hand, low voltage can result in increased current flow due to the fixed rated power of the load, which can cause significant damage to motors and air compressors.
Examples of appliances affected by low voltage include refrigerators, freezers, water pumps, washing machines, and air conditioners.
Our voltage protector series products offer an economical and practical solution to address this issue. Taking a 220V protector as an example, we have a preset value, let’s say the factory-set operating range is 165-250V. When the voltage falls below 165V or exceeds 250V, our product will cut off the power supply to protect the electrical appliances. Once the voltage returns to the set range, the power supply will automaticallybe restored.

General
YCF8-PV series fuses have a rated operating voltage of DC1500V and a rated current of 80A.It is mainly used in the solar photovoltaic DC combiner box to break the line overload and short-circuit current generated by the current feedback of the photovoltaic components of the solar panel and the inverter,so as to protect the solar photovoltaic components.It is widely used in the circuit protection of electric drive system,power supply system and auxiliary system,and the fuse can also be selected in any other DC circuit as the circuit overload and short circuit protection of electrical components.
Standard:IEC60269,UL4248-19.

Genera
Cage type isolation switch YCISC8 series is suitable forDCpowersystems with rated woltage DC1200V andbelow and rated current 32A and below.This product is used for infrequenton/off,and can disconnect1-2 MPPT lines at thesame time.It is mainly used in the control cabinet,distribution box and combiner box of the photovoltaic power generation system,and is used for isolation ofthe DC power distribution system.The external waterproof performance of this product reaches
IP66.
Standards:IEC/EN60947-3:AS60947.3,UL508i.