Products Manufacturers | China Products Factory & Suppliers - Part 38

Products

Products

Product Category

GW1-12G(D) Isolation Switch

Operating conditions
1.The altitude above sealevel:2000m
2.The ambientair temperature:-40℃~40℃ wind speed does not exceed 35m/s.
3.The earthquake intensitydoes not exceed 8 degrees
4.The working situation is without frequentviolent vibration.
5.The installation site ofordinarytypeisolator should be kept awayfromgas,smoke chemical deposition,salt-spray fog,dust and other explosiveand corrosive maters that affect seriously insulation and conductioncapabilityof the isolator.
6.Pollutioni-proof type isolatoris applicable to severe filthyconduction area,however,it shouldn’t be anyexplosive matters and matters causing fire.
LFSB-10 Current Transformer

This type of current transformer is casting resin,fully enclosed and post type product.It is used for metering electric energy andcurrent,relay protection in the electrical system.

Standard:IEC61869-2
LZZBJ10 Current Transformer

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
LZZBJ18 Current Transformer

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
LCT Current Transformer

This zero-sequence current transformer has such characteristics as high precision,good linearity, reliable operation, easy installation, especially this transformer can be applied to system of zero-sequence current 1A and 2A while conventional zero sequence transformer can not. The exterior design is two central-circle combined type, novel structure, beautiful and reasonable.

The products can be used for power supply system in the fields of electric power, metallurgy, coal, petroleum, chemical industry, building material and other industries.

Standard:IEC 61869-1
JDZ(J)-3,6,10(Q) Load Switch

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
JDZ8-3,6,10 Voltage Transformer

JDZ8-3, 6, and 10 voltage transformers are single-phase epoxy resin cast insulation fully enclosed products, suitable for use in power systems with non effectively grounded neutral points at rated frequencies of 50HZ or 60HZ and rated voltages of 3KV, 6KV, and 10KV for energy metering, voltage monitoring, and relay protection

Standards:IEC 61869-3
JDZ□□18(10)-3,6,10 Voltage Transformer

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
JDZC-6,10 Voltage Transformer

JDZC-6,10 type voltage transformer is the indoor device of epoxy resin cast insulation,applied to electic measurement and electicprotection inthe electric system of ratedfrequency 50Hzand rated voltage 10kV.
Standard:IEC 61869-3
JSZW3-3、6、10 Voltage Transformer

Technical data
1.Standard:GB1207-2006 voltagetransformer
2.Technical parameterform
3.The creepage of product surface complywith Grade ll ofpollution.
4.Other technical parameter pleaserefers to tablebelow
JDJ Voltage Transformer

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
JSJW Voltage Transformer

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln

<< < 35 36 37 38 39 40 41 > >> 38 / 43