General
Themeteris designed to measure single phasetwo wire ACactive energy.It adoptsLSI and SMT technology,the key components are long life international brandproducts.All ofits functions complywith the relative technical requirement fordass1 single phase watt hour meter in IEC62053-21.It is a long lifemeter with theadvantage ofhighstability,high overload capability ,low power loss and compactsize.

General
The meter is designed to measure single phase two wire AC active energy likeresidential,utility and industrial application.It has remote read communication port
RS485.It is a long life meter with the advantage ofhigh stability,high over loadcapability,low power loss and smallvolume

General
The meter is designed to measure single phase two wire AC active energy like residential, utility and industrial application. It is a long life meter with the advantage of high stability, high over load capability, low power loss and small volume .

General
The meter is designed to measure single phase two wire AC active energy variable parameter like residential, utility and industrial application. It has remote read communication port RS485 and WIFI. It is a long life meter with the advantage of high stability, high over load capability, low power loss and small volume .

1.To prevent electric shock,the power must be off when wiring isto be carried out

2.Wiring shall be arranged directly according to ports. Please confirm whether allconnections are correct.

3.Use drag steering.

4.To reduce electromagnetic interference to electrical wires,

equipment and wires shall be connected in suitable range with same size for shortest connection.

 

5.Wiring layout shall be away from any internal electromagnetic nterference source.

6.The cross section of wires connecting power must be 0.5mm2-2.5mm2(20-14AWG;75℃(min)).And the current load of the wires shall be 6A.

7.Copper wire (standard or single core cable)can be used.

8.Before testing the equipment,please test the voltage and confirm whether it isproper

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln

Insulated Butt Connectors
Material:Copper;Insulation Materials:PVC

UK Series terminal connector

YRM6 fully insulated fully enclosed compact switchgear,which can realize functions of control,protection,measurement.monitoring,communication,etc.is especially suitable for places with small distribution faility site and high reliabilityrequirements,and places with a relatively harsh natural environment and conditions.such as underground,highland and coastalareas.

Terminal Blocks

Terminal blocks H U(W) V(F) type. Material: Made of PA PE or PP.