Projects
Solutions
Services
News
About Us
JDZC Power System Electrical grid Voltage Transformer safety features
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
JDZC Power System Electrical grid Voltage Transformer safety features
Picture
JDZC Power System Electrical grid Voltage Tran...
JDZC-6,10 type voltage transformer is the indoor device of epoxy resin cast insulation,applied to electric measurement and electric protection in the electric system of rated frequency 50Hz and rated voltage 10kV.
Standard:IEC 61869-3
Contact Us
Product Details
JDZC-6,10 type voltage transformer is the indoor device of epoxy resin cast insulation,applied to electric measurement and electric
protection in the electric system of rated frequency 50Hz and rated voltage 10kV.
Standard:IEC 61869-3
Selection
Structure
This transformer is the type of full insulation, its primary winding two terminals that are checked according to full insulation level,
distributd on both sides of casting body top. It is mainly made up of three part; iron core, secondary winding and primary winding
which are all encapsulated in the epoxy resin casting body, featured with stable electric performance and perfect damp proof property
Operating conditions
Equipment category: Indoor
Environmental temperature: Max temperature +40℃, Min temperature -5℃
There shall not be stains and corrosive or explosive mediums that seriously affect the insulation of transformer in the air.
Technical data
| Type | Rated voltage ratio(V) |
Rated secondary output(VA) |
Accuracy classes combination |
Rated insulation level(kV) | |
| 1a1b(100V) | 2a2b(220V) | ||||
| JDZC-10 | 60000/100/220 | 30 | 700 | 0.5/3 | 7.2/32/60 12/42/75 |
| 50 | 8,001,000 | ||||
| 80 | 20,003,000 | ||||
Overall and mounting dimensions(mm)
Write your message here and send it to us
Related Products
-
JDX-10 Voltage Transformer -
JDJ Voltage Transformer -
JDZ□□18(10)-3,6,10 Voltage TransformerJDZ口口18(10)-3,6,10 Voltage Transformer The voltage transform is the type of cast resin insulation and full enclosed, used for electric energy metering, voltage control and relay protection in the power systems of rated voltage 3kV, 6kV, and 10kV or below. Standard:IEC 61869-3 Selection Technical data 1. Technical data form. 2. Partial dischanage is inline with GB1207-2006 voltage transformer. 3. Anti-pollution degree: see fig. Technical data Type Rated voltage ratio(V) Rated ou... -
JDZXF Voltage TransformerThe voltage transform is the type of cast resin insulation and full enclosed, used for electric energy metering, voltage control and relay protection in the power systems of rated voltage 3kV, 6kV, and 10kV or below. Standard:IEC 61869-3 Selection Technical data 1. Technical data form. 2. Partial dischanage is inline with GB1207-2006 voltage transformer. 3. Anti-pollution degree: see fig. Technical data Type Rated voltage ratio(V) Rated output(VA) Ultimate output(VA) ... -
JDZX8 Voltage TransformerJDZ8-3, 6, and 10 voltage transformers are single-phase epoxy resin cast insulation fully enclosed products, suitable for use in power systems with non effectively grounded neutral points at rated frequencies of 50HZ or 60HZ and rated voltages of 3KV, 6KV, and 10KV for energy metering, voltage monitoring, and relay protection Standards:IEC 61869-3 Technical data The voltage transformer is in accordance with GB1207 and IEC186 standards… Note: If user’s data goes beyond the above-...
-
Phone：86-577-61989999
-
Email：cncele@cncele.com
-
Address：CNC High-Tech Hutou Industrial Zone, Liushi Town, Yueqing, Wenzhou Ctity, China
Copyright © 2024 CNC ELECTRIC GROUP CO.,LTD. All Rights Reserved.
Hot Products - Sitemap
3p Ac Mcb, 250amp Mccb Circuit Breaker, Mccb Microprocessor Based, 6a Elcb, 3 Phase Starter, Mpcb,
Hot Products - Sitemap
3p Ac Mcb, 250amp Mccb Circuit Breaker, Mccb Microprocessor Based, 6a Elcb, 3 Phase Starter, Mpcb,