Projects
Solutions
Services
News
About Us
JDZ8-3,6,10 Voltage Transformer
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
JDZ8-3,6,10 Voltage Transformer
Picture
JDZ8-3,6,10 Voltage Transformer
JDZ8-3, 6, and 10 voltage transformers are single-phase epoxy resin cast insulation fully enclosed products, suitable for use in power systems with non effectively grounded neutral points at rated frequencies of 50HZ or 60HZ and rated voltages of 3KV, 6KV, and 10KV for energy metering, voltage monitoring, and relay protection
Standards:IEC 61869-3
Contact Us
Product Details
JDZ8-3,6,10 Voltage Transformer
JDZ8-3, 6, and 10 voltage transformers are single-phase epoxy resin cast insulation fully enclosed products, suitable for use in
power systems with non effectively grounded neutral points at rated frequencies of 50HZ or 60HZ and rated voltages of 3KV, 6KV, and 10KV for energy metering, voltage monitoring, and relay protection
Standards:IEC 61869-3
Technical data
The voltage transformer is in accordance with GB1207 and IEC186 standards...
| Type | Rated frequency (Hz) |
Voltage ratio (V) |
Accuracy class |
Rated output (VA) |
Ultimate output (VA) |
Rated insulation level(kV) |
| JDZ8-3 | 50 | 3000/100 | 0.2 | 40 | 600~1000 | 3.6/24/40 |
| 0.5 | 80 | |||||
| JDZ8-6 | 50 | 6000/100 | 0.2 | 40 | 600~1000 | 7.2/32/60 |
| 0.5 | 80 | |||||
| JDZ8-10 | 50 | 10000/100 | 0.2 | 40 | 600~1000 | 12/42/75 |
| 0.5 | 80 |
Note:
If user's data goes beyond the above-mentioned scope. they may be subjected to an agreement between manufacturer and purchaser. Rated put and its relative accuracy class are alternative.
Overall and mounting dimensions(mm)
Technical data
The voltage transformer is in accordance with GB1207 and IEC186 standards...
| Type | Rated frequency (Hz) |
Voltage ratio (V) |
Accuracy class |
Rated output (VA) |
Ultimate output (VA) |
Rated insulation level(kV) |
| JDZX8-3 | 50 |  |
0.2/6P 0.5/6P |
30/100 50/100 |
500 | 3.6/24/40 |
| JDZX8-6 | 50 |  |
0.2/6P 0.5/6P |
30/100 50/100 |
500 | 7.2/32/60 |
| JDZX8-10 | 50 |  |
0.2/6P 0.5/6P |
30/100 50/100 |
500 | 12/42/75 |
Note:
If user's data goes beyond the above-mentioned scope. they may be subjected to an agreement between manufacturer and purchaser. Rated put and its relative accuracy class are alternative.
Overall and mounting dimensions(mm)
Write your message here and send it to us
Related Products
-
ZN63M-12 (Magnetic type）Indoor Vacuum Circuit ...● The ZN63M-12 vacuum circuit breaker adopts a permanent magnet operating mechanism, which is used to open and close various types of electric loads. It is suitable for occasions that operate frequently within the working current range and have certain requirements for the number of short-circuit breaking operations. ● Standard: IEC 62271-100. Selection ZN63M - 12 P M 630 - 25 HT P210 Name Rated voltage(KV) Pole type Operating mechanism Rat... -
KS9 Oil-Immersed Transformer.KS9 Three-phase Mining Oil-immersed Transformer KS9 series oil immersed mining transformer is suitable for central transformer substation, mining stop, general wind dypass and main wind dypass which has gas but has not explosive ganger. Moreover, it is suitable for the moisture environment. The iron cores of these series transformers adopt silicon steel slice, which is made of excellent low loss crystal granule. They have the advantages such as low no-load loss, smal... -
GW9 Isolation SwitchGW9 Outdoor Isolation Switch The"GW9-10G" of outdoor MV isolator switch is the high voltage switch equipment of single phase AC50Hz.The product is suitable for power system with rated voltage 10KV to make or break power supply under circumstances of with voltage and nomload. The isolator adopts isolated rod to operate. Standard:IEC 60129 Selection Operating conditions 1. The altitude does not exceed 1000m. 2. The ambien t air temperature: Maximum+40℃: Minimum: Gener... -
GN30-12 Isolation SwitchGN30-12 Indoor Isolation Switch GN30-12 (D) rotary indoor MV isolating switch is a new type isolation switch of rotary knife type, the main structure is fixed two groups of insulator and contact on the two plane of three-phase chassis, through the rotary contact, realize the switch on-off. GN30-12 (D) switch is a new type added grounding knife on the GN30-12 type switch basis, which can meet the needs of different power systems. The product design is with compact, sm... -
GW4 Isolation SwitchGW4 Outdoor Isolation Switch GW4 outdoor MV isolation switch is used for three-phase AC 50Hz outdoor high-voltage electrical equipment, switching of lines under high-voltage no-load conditions, and electrically isolating electrical equipment such as high-voltage busbars, circuit breakers, and live high-voltage equipment for maintenance voltage lines , can also be used to switch small capacitor or inductor current. When the knife is in the normal open circuit position... -
LFSB-10 Current Transformer● This type of current transformer is casting resin, fully enclosed and post type product. It is used for metering electric energy and current, relay protection in the electrical system. ● Standard:IEC 61869-2. Selection Structural introduction This type of current transformer is fully enclosed and post type. It has a good ability of insulation, moisture proof and antipollution. It is small and light. It can be installed at any place and any direction. Technical data 1. Rated insulation lev...
Copyright © 2022 CNC ELECTRIC GROUP CO.,LTD. All Rights Reserved.
Hot Products - Sitemap
3 Phase Starter, 3p Ac Mcb, Mccb Microprocessor Based, Mpcb, 250amp Mccb Circuit Breaker, 6a Elcb,
Hot Products - Sitemap
3 Phase Starter, 3p Ac Mcb, Mccb Microprocessor Based, Mpcb, 250amp Mccb Circuit Breaker, 6a Elcb,