Projects
Solutions
Services
News
About Us
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
GW4 Isolation Switch
GW4 outdoor MV isolation switch is used for three-phase AC 50Hz outdoor high-voltage electrical equipment,switching of linesunder high-voltage no-load conditions,and electrically isolating electrical equipment such as high-voltage busbars,circuitbreakers,and live high-voltage equipment for maintenance voltage lines,can also be used to switchsmall capacitor or inductorcurrent.Whenthe knifeis in the normal open circuit position,it can provide insulation distancethat meets safety requirements Widely used in 35-110kV substations
Contact Us
Product Details
GW4 Outdoor Isolation Switch
GW4 outdoor MV isolation switch is used for three-phase AC 50Hz outdoor high-voltage electrical equipment, switching of lines under high-voltage no-load conditions, and electrically isolating electrical equipment such as high-voltage busbars, circuit breakers, and live high-voltage equipment for maintenance voltage lines , can also be used to switch small capacitor or inductor current. When the knife is in the normal open circuit position, it can provide insulation distance that meets safety requirements. Widely used in 35-110kV substations.
Selection
Technical data
| Item | Unit | Parameters | |||||
| GW4-40.5 | GW4-72.5 | GW4-126 | GW4-126G | GW4-145 | |||
| Rated voltage | KV | 40.5 | 72.5 | 126 | 126 | 145 | |
| Rated current | A | 630 1250 2000 2500 |
630 1250 2000 2500 4000 |
630 1250 2000 2500 |
630 1250 |
1250 2000 2500 |
|
| Rated short-time withstand current (RMS) | KA | 20 31.5 40(46) |
20 31.5 40(46) |
20 31.5 40(46) |
20 31.5 |
20 31.5 40(46) |
|
| Rated peak withstand current (peak) | KA | 50 80 100(104) |
50 80 100(104) |
50 80 100(104) |
50 80 |
50 80 100(104) |
|
| Rated short-time withstand voltage (effective value) | To the ground | KV | 80 | 140 | 185(230) | 185 | 375 |
| Fracture | 110 | 160 | 210(265) | 210 | 315 | ||
| Rated lightning impulse withstand voltage (peak) |
To the ground | KV | 185 | 325 | 450(550) | 450 | 650 |
| Fracture | 215 | 375 | 520(630) | 550 | 750 | ||
| Wiring terminal rated the horizontal tension |
490(735) | 735 | 735 | 735 | 960 | ||
| Weight of single pole | 80 | 200 | 240 | 300 | 300 | ||
Operating conditions
1. Ambient temperature: upper limit +40℃, lower limit -30℃
2. Altitude: no more than 3000m;
3. Wind speed: no more than 35m/s;
4. Earthquake intensity: do not exceed 8 degree;
5. Pollution level: no more than III class
6. No severe vibration, no corrosive gas, no fire, no explosion danger place.
Overall and mounting dimensions(mm)
1. Wiring terminal
Related Products
-
GW1-24 Isolation SwitchSelection Operating conditions The altitude above sea level: 2000m The ambient air temperature: -40℃~40℃ wind speed does not exceed 35m/s. The earthquake intensity does not exceed 8 degrees. The working situation is without frequent violent vibration. The installation site of ordinary type isolator should be kept away from gas,smoke chemical deposition, salt-spray fog, dust and other explosive and corrosive maters that affe... -
GW1-12G(D) Isolation SwitchSelection Operating conditions The altitude above sea level: 2000m The ambient air temperature: -40℃~40℃ wind speed does not exceed 35m/s. The earthquake intensity does not exceed 8 degrees. The working situation is without frequent violent vibration. The installation site of ordinary type isolator should be kept away from gas,smoke chemical deposition, salt-spray fog, dust and other explosive and corrosive maters that affect seriously insulation ... -
GN19-12 Indoor isolation switchGN19-12 Indoor isolation switch GN19-12 indoor MV isolation switch series MV switch equipment used for rated voltage 10kV, AC 50Hz and below power system, equipped with CS6-1 type manual operating mechanism, open, close the circuit in the case of no load, voltaged. There are derivatives such as anti pollution, high prototype and added charged display device type, etc. Technical data Model Rated voltage (kV) Maximum voltage (kV) Maximum current (A) 4S ther... -
GW9 Isolation SwitchGW9 Outdoor Isolation Switch The"GW9-10G" of outdoor MV isolator switch is the high voltage switch equipment of single phase AC50Hz.The product is suitable for power system with rated voltage 10KV to make or break power supply under circumstances of with voltage and nomload. The isolator adopts isolated rod to operate. Standard:IEC 60129 Selection Operating conditions 1. The altitude does not exceed 1000m. 2. The ambien t air temperature: Maximum+40℃: Minimum: Gener... -
GW5 Isolation SwitchGW5 Outdoor Isolation Switch GW5 outdoor MV isolating switch is used for three-phase AC 50Hz outdoor high voltage electrical equipment, used for the line to switching under voltage pressed no load condition, and electrical isolation the maintenanced high voltage bus, circuit breakers and other electrical equipment and charged high voltage line, can also be used for the opening and closing small capacitance or inductance current. When the knife in the normal break pos... -
GN30-12 Isolation SwitchGN30-12 Indoor Isolation Switch GN30-12 (D) rotary indoor MV isolating switch is a new type isolation switch of rotary knife type, the main structure is fixed two groups of insulator and contact on the two plane of three-phase chassis, through the rotary contact, realize the switch on-off. GN30-12 (D) switch is a new type added grounding knife on the GN30-12 type switch basis, which can meet the needs of different power systems. The product design is with compact, sm...
Hot Products - Sitemap
6a Elcb, 250amp Mccb Circuit Breaker, 3p Ac Mcb, 3 Phase Starter, Mccb Microprocessor Based, Mpcb,