Projects
Solutions
Services
News
About Us
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
GN30-12 Isolation Switch
Operating conditions
1.The altitude does not exceed1000m;
2.Ambientair temperature:-10℃~+40℃;
3.Relative humidity:dailyaverage value is not greater than 95%,monthlyaveragevalue is not greater than 90%;
4.Contamination grades:no serious dust,corrosiveand explosive material place;
5.Earthquake intensity:do notexceed 8 degree;No regularviolent vibration place.
Contact Us
Product Details
GN30-12 Indoor Isolation Switch
GN30-12 (D) rotary indoor MV isolating switch is a new type isolation switch of rotary knife type, the main structure is fixed two groups of insulator and contact on the two plane of three-phase chassis, through the rotary contact, realize the switch on-off.
GN30-12 (D) switch is a new type added grounding knife on the GN30-12 type switch basis, which can meet the needs of different power systems.
The product design is with compact, small occupied space, strong insulating ability, easy installation and adjustment, its performance meets the GB1985-89 "AC high voltage isolating switch and the grounding switch" requirements, applicable to the rated voltage 10kV AC 50Hz and below indoor power system, to open and close the circuit when voltaged, no load. It can be used with the high voltage switch cabinet, and also can be used separately.
Selection
Operating conditions
1. The altitude does not exceed 1000m;
2. Ambient air temperature: -10 ℃ ~+40 ℃;
3. Relative humidity: daily average value is not greater than 95%, monthly average value is not greater than 90%;
4. Contamination grades: no serious dust, corrosive and explosive material place;
5. Earthquake intensity: do not exceed 8 degree; No regular violent vibration place.
Technical data
| Product specifications Parameter Item |
GN30-12/400-12.5 | GN30-12/630-12.5 | GN30-12/1000-12.5 | GN30-12/1250-12.5 | GN30-12/1600-12.5 | |
| GN30-12D/400-12.5 | GN30-12D/630-12.5 | GN30-12D/1000-12.5 | GN30-12D/1250-12.5 | GN30-12D/1600-12.5 | ||
| Voltage, current parameters | ||||||
| Rated voltage (kV) | 12 | |||||
| Rated current (A) | 400 | 630 | 1000 | 1250 | 1600~3150 | |
| Rated short-time withstand current (kA) | 12.5 | 20 | 31.5 | 31.5 | 40 | |
| Rated short-time duration (S) | 4 | 4 | 4 | 4 | 4 | |
| Rated peak withstand current (KA) | 31.5 | 50 | 80 | 80 | 100 | |
| Rated insulation level | 1 min power frequency withstand voltage (KV) | Between pole, pole to earth 42 fracture 48 | ||||
| Lightning impulse voltage (kV) | Between pole, pole to earth 75 fracture 85 | |||||
Overall and mounting dimensions(mm)
1. Vertical incoming contact
2. Vertical contact support
3. Rotating moving contact
4. Insulator
5. Grounding contact
6. Parallel contact support
7. Parallel outgoing contact
8. Rack
9. Name plate
10.Opening and closing crank arm
Notes
Outline and installation dimensions of isolation switches on a distance of 210mm The incoming and outgoing line methods are: parallel incoming line and parallel out going line:
Related Products
-
GW5 Isolation SwitchGW5 Outdoor Isolation Switch GW5 outdoor MV isolating switch is used for three-phase AC 50Hz outdoor high voltage electrical equipment, used for the line to switching under voltage pressed no load condition, and electrical isolation the maintenanced high voltage bus, circuit breakers and other electrical equipment and charged high voltage line, can also be used for the opening and closing small capacitance or inductance current. When the knife in the normal break pos... -
GW1-12G(D) Isolation SwitchSelection Operating conditions The altitude above sea level: 2000m The ambient air temperature: -40℃~40℃ wind speed does not exceed 35m/s. The earthquake intensity does not exceed 8 degrees. The working situation is without frequent violent vibration. The installation site of ordinary type isolator should be kept away from gas,smoke chemical deposition, salt-spray fog, dust and other explosive and corrosive maters that affect seriously insulation ... -
GW9 Isolation SwitchGW9 Outdoor Isolation Switch The"GW9-10G" of outdoor MV isolator switch is the high voltage switch equipment of single phase AC50Hz.The product is suitable for power system with rated voltage 10KV to make or break power supply under circumstances of with voltage and nomload. The isolator adopts isolated rod to operate. Standard:IEC 60129 Selection Operating conditions 1. The altitude does not exceed 1000m. 2. The ambien t air temperature: Maximum+40℃: Minimum: Gener... -
GN19-12 Indoor isolation switchGN19-12 Indoor isolation switch GN19-12 indoor MV isolation switch series MV switch equipment used for rated voltage 10kV, AC 50Hz and below power system, equipped with CS6-1 type manual operating mechanism, open, close the circuit in the case of no load, voltaged. There are derivatives such as anti pollution, high prototype and added charged display device type, etc. Technical data Model Rated voltage (kV) Maximum voltage (kV) Maximum current (A) 4S ther... -
GW4 Isolation SwitchGW4 Outdoor Isolation Switch GW4 outdoor MV isolation switch is used for three-phase AC 50Hz outdoor high-voltage electrical equipment, switching of lines under high-voltage no-load conditions, and electrically isolating electrical equipment such as high-voltage busbars, circuit breakers, and live high-voltage equipment for maintenance voltage lines , can also be used to switch small capacitor or inductor current. When the knife is in the normal open circuit position... -
GW1-24 Isolation SwitchSelection Operating conditions The altitude above sea level: 2000m The ambient air temperature: -40℃~40℃ wind speed does not exceed 35m/s. The earthquake intensity does not exceed 8 degrees. The working situation is without frequent violent vibration. The installation site of ordinary type isolator should be kept away from gas,smoke chemical deposition, salt-spray fog, dust and other explosive and corrosive maters that affe...
Hot Products - Sitemap
250amp Mccb Circuit Breaker, 3p Ac Mcb, Mccb Microprocessor Based, 6a Elcb, 3 Phase Starter, Mpcb,