China FZN21FZRN21-12 Load Switch Manufacture and Factory

English

Home

Products

Power T&D

Medium and high voltage products

Load Switch

Product Overview
Product Details
Data Download
Related Products

Conatct Us

FZN21FZRN21-12 Load Switch

Picture

FZN21FZRN21-12 Load Switch

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln

Conatct Us

Product Details

Selection

Operating conditions

1. Altitude: no more than 1000m;

2. The environment temperature: upper limit +40℃, lower limit -30℃;

3. Relative humidity: daily average value is not greater than 95%, monthly average is not greater than 90%;

4. Saturated steam pressure: daily average value is not higher than 2.2×10 -3 Mpa, monthly average is not higher than 1.8×10 -3 Mpa;

5. No severe vibration, no corrosive gas, no fire, no explosion danger place.

Technical data

Item	Unit	Parameter
Technical parameter of combinations
Rated voltage	kV	12
Rated frequency	Hz	50
The maximum rated current of the fuse	A	125
Transfer current	A	1550
The fuse triggered switch segment time	ms	40±5
Rated short-circuit breaking current	kA	31.5
Rated short-circuit closing current (prospective peak value)	kA	80
1min power frequency withstand voltage (vacuum fracture, interphase, phase to earth / isolation fracture)	kV	42/49
The lightning impulse withstand voltage (vacuum fracture, interphase, phase to earth / isolation fracture)	kV	75/85
Fuse impinger type		Medium-sized
Technical parameters of vacuum load switch of combined electrical appliance
Rated voltage	kV	12
Rated frequency	Hz	50
Rated current	A	630
Rated active load breaking current	A	630
Rated close loop breaking current	A	630
5% at rated load breaking current	A	31.5
Rated cable charging breaking current	A	10
Interrupting no load transformer capacity	kVA	1250
1min power frequency withstand voltage (vacuum fracture, interphase, phase to earth / isolation fracture)	kV	42/48
The lightning impulse withstand voltage (vacuum fracture, interphase, phase to earth / isolation fracture)	kV	75/85
4s rated short-time withstand current	kA	31.5
Rated peak withstand current	kA	80
Rated short-circuit closing current	kA	80
Mechanical life	Times	10000
Allowable cumulative thickness wear in contact	mm	2
Opening and closing operating torque	N·m	≤200

Overall and mounting dimensions(mm)

1. Cabinet bracket	7. Static contact	13. Insulated tension pole
2. Disconnector	8. Insulator	14. Main axle
3. Fuse	9. Grounding knife	15. Layshaft
4. Insulated tension pole	10. Grounding knife spring	16. Adjusting yoke
5. Upper bracket	11. Opening spring	17. Spring operating mechanism
6. Vacuum interrupter	12. The tripping driving device	-