● lt can be used in indoor system of 50HZ and rated voltage of 3.6KV， 7.2KV， 12KV， 24KV，40.5KV;Used together with other switch facilities such as loading swithes， vacuum contactors，it can protect electric transformers and other electric facilities against overloading or circuit break. It is also a necessary accessory for high-voltage switchbox，circular circuit cabinet，high / Low voltage top-loading transformer substation. Selection Technical data Ty...

● This product can be used in indoor system of AC50Hz and rated voltage of 3.6-40.5KV to protect thevoltagemutual-inductor from over loading and circuit break.(tested by-inductor from overloading and circ-uit break.(Tested by National high-voltage quality Supervising and Testing Center,in accordance with IEC282-1). Selection Technical data Type Rated voltage(Kv) Rated current(A) Rated break current(KA) Dimensions XRNP1- □/□-□-1 7.2 (3.6) 12 0.2、0.3、0.5...

● Outdoor drop type fuses are suitable for 35kV and below voltage and frequency 50Hz power systems, used for overload and short circuit protection of transmission lines and power transformers, and for breaking and closing rated load current. ● The drop type fuse consists of an insulation bracket and a fuse tube, with static contacts installed at both ends of the insulation bracket and dynamic contacts installed at both ends of the fuse tube. The fuse tube consists of an inner arc extinguishin...

● The product can be used in indoor AC system of 50Hz and rated voltage 3.6kV and 7.2KV 12Kv. When used togetherwith other protection facilitles(such as switches and vacuum contactors)，it works to protect high-volttagemotor and other electric facilities from overloading and circrit break. Selection Technical data Rated voltage(Kv) Rated break current KA Rated current of the fuse (A) Rated current of the fuse link (A) Major dimensions A B C D XRNM1-3...

● The product is used in overload or short-circuit protection for instrument transformer. At the time of holdingup byrestrain circuit current way to get minimum from carry on instantaneous to turn on and break,it should be witin therange of 0.6-1.8A to fuse the electric current in one minute. Technical data Product type RN2-3、6、10 RN2-15、20 RN2-35 Rated voltage 3 6 10 15 20 35 KV Fuse current A 0.5 0.5 0.5 Capacity of largest break of three-phase MV...

● The product is used in overload or short-circuit protection for electric transformer. The current limiting means that the fuse will cut off the circuit before the short-circuit current reaches the peak value. Features Current which passes the fuse when being1.3 times of itsspecified electric current. Do not fusing for an hour;Whenthe current through the fuse is 2 times of its specinedelectric current. fusing in an hour;Refer to its fusingfeature curve in chart 1whe...