Featured Products Manufacturers | China Featured Products Factory & Suppliers - Part 13

Product Category

X3 Terminal Blocks

Terminal Blocks

Terminal blocks H U(W) V(F) type. Material: Made of PA PE or PP.
EU/UK Series Wall Switch

EU/UK Series Switch

Technoligy light up I fe.

innovation lead the future.

Touch Switch

Dimmer Switch

Fan Switch

Curtain Switch

Doorbell Switch

WIFI Switch

Zigbee Switch
YCE-9UIF3 3 Phase Digital Clamp MultiMeter

1.To prevent electric shock,the power must be off when wiring isto be carried out

2.Wiring shall be arranged directly according to ports. Please confirm whether allconnections are correct.

3.Use drag steering.

4.To reduce electromagnetic interference to electrical wires,

equipment and wires shall be connected in suitable range with same size for shortest connection.

5.Wiring layout shall be away from any internal electromagnetic nterference source.

6.The cross section of wires connecting power must be 0.5mm2-2.5mm2(20-14AWG;75℃(min)).And the current load of the wires shall be 6A.

7.Copper wire (standard or single core cable)can be used.

8.Before testing the equipment,please test the voltage and confirm whether it isproper
CJX2s AC three poles Contactor for ac

Product Overview
CJX2s series AC Contactor with novel appearance and compact structure is suitablefor using starting &controlling the AC motor frequently,switching on and off thecircuitat a long distance.It is used in combinationwith thermal relay to compose amagneticmotor starter
StandardIEC60947-1,IEC 60947-4-1.
CJX2i 12A 18A AC Contactor

Product Overview
CJX2i series AC Contactorwith novel appearance and compact structure is suitablefor using starting &controling the AC motor frequently,switching on and off thecircuit at a long distance.It is used in combinationwith thermal relayto compose amagneticmotor starter
Standard IEC 60947-1,IEC 60947-4-1.
CJX2s AC 630A Contactor

Compared with the old products, the volume of 120~630 is reduced by 20~40% under same current, which saves cabinet space and is more economical and applicable.
CKJ5 3P 400A high voltage Vacuum AC contactor

CKJ5 series vacuum AC contactors (hereinafter referred to as contactors) are mainly used in circuits with AC 50Hz,rated working voltage up to 1140V, and rated working current up to 630A. They are used for long distance connection and disconnection of circuits, and can be combined with appropriate thermal overload relays or electronic protectors to form vacuum electromagnetic starters. They are particularly suitable for forming isolated vacuum electromagnetic starters.
YCB6H-63 1P 20A AC MCB

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
YCB9-63R series 63a circuit breaker

YCB9-63R series

15KA Miniature Circuit Breaker

Instruction

1.General

YCB9-63R Series Miniature circuit breaker

is applicable to protecting from overload

and short circuit in the circuit of AC 50/

60Hz, Rated voltage 230/400V rated

current 63A,it also can be used in switch

the infrequent operation of the circuit

under normal conditions. It’s mainly used

in industry, commerce, high-rise buildings

and residential houses and so on.

Standard: IEC 60898-1

2.Operating conditions

2.1 Circumstance temperature -5℃~+40℃,

average temperature within 24h not

exceeding +35℃.

2.2 Altitude above sea level less than 2000m.

2.3 Humidity not exceeding 50% at 40℃

and not exceeding 90% at 25℃.

2.4 Pollution class 2.

-1-2.5 Installation class ll or III.

2.6 Installation method DIN Rail mounting

type.

2.7 Product shall be installed at the place

where there shall be no severe impact

and vibration.

2.8 The product should locate in the places

where there are no obvious impact and

shake.
YCB7-63N 63A 3Pole MCB

General

The YCB7-63N series miniature circuit breaker are suitable for overcurrent protection building line facilities and similar purposes in AC 50/60Hz, rated voltage 230V/400V,

rated current up to 63A circuits. They have isolation, overload, and short circuit protection functions, and can also be used for infrequent operation and switching of lines undernormal circumstances.
Circuit breakers are suitable for various places such as industry,commerce,high-rise buildings, and residential buildings.

Standard: IEC/EN 60898-1.
Sontuoec Stfw-40 (ST225) Moulded Case Circuit Breaker New MCCB

1.Thread spec.: PG
2.Material: Parts A, C, E are made of UL approved nylon PA66, parts B and D are
made of Nitrile butadiene rubber(NBR).
3.Working temperature: -40℃ to 100℃ in static state, instantaneous heat resistance
up to 120℃; -20℃ to 80℃ in dynamic state, instantaneous heat resistance up to
100 ℃.
4.Characteristics: Special design of clamping die and rubber part, large range in
clamping cable, ultra-strong stretching resistance, waterproof, dustproof, and high
ability to resist salt, acid, alkali, alcohol, grease and general solvent.

<< < Previous 8 9 10 11 12 13