Solutions
Support
News
About Us
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
DR Power Supply
Picture
DR Power Supply
1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
Conatct Us
Product Details
Single output DIN rail power supply Summary
single output: power 75W
Input voltage: 85~264VAC 120~370VDC
General Specification 55.5 × 125.2 × 100mm
| Model
Specification |
DR-75-12 | DR-75-24 |
| DC output voltage, current | 12V 0~6.3A | 24V 0~3.2A |
| Wave and noise | 100mVp-p | 150mVp-p |
| Inlet wire stability | ±0.5% | ±0.5% |
| Load stability | ±0.5% | ±0.5% |
| Efficiency | 76% | 80% |
| Adjustable range for DC voltage | ±10% | ±10% |
| Input voltage range | 85~264VAC 120~370VDC 47-63Hz | |
| Impact current | Cold start current 20A/115VAC 40A/230VAC | |
| Overload protection | 105%~150% cut off the output, automtic recovery | |
| Over voltage protection |
121%-142% shutdownO/Pvoltage, re-poweronto recover |
|
| Setup, rise, hold up time | 1000ms, 60ms, 60ms/230VAC at full load | |
| Withstand voltage | I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute | |
| Isolation resistance | I/P-O/P I/P-FG O/P-F/G: 500VDC/100MΩ | |
| Working temperature | -10℃~+50℃ | |
| Dimension | 55.5×125.2×100mm | |
Single output DIN rail power supply Summary
single output: power 120W
Input voltage: 85~264VAC 120~370VDC
General Specification 65.5 × 125.2 × 100mm
| Model
Specification |
DR-120-12 | DR-120-24 |
| DC output voltage, current | 12V 0~10A | 24V 0~5A |
| Wave and noise | 85mVp-p | 85mVp-p |
| Inlet wire stability | ±0.5% | ±0.5% |
| Load stability | ±1% | ±0.5% |
| Efficiency | 80% | 84% |
| Adjustable range for DC voltage | ±10% | ±10% |
| Input voltage range | 85~264VAC 120~370VDC 47-63Hz | |
| Impact current | Cold start current 20A/115VAC 40A/230VAC | |
| Overload protection | 105%~150% cut off the output, automtic recovery | |
| Over voltage protection |
120%-140% shutdownO/Pvoltage, re-poweronto recover |
|
| Setup, rise, hold up time | 500ms, 70ms, 30ms/230VAC at full load | |
| Withstand voltage | I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute | |
| Isolation resistance | I/P-O/P I/P-FG O/P-F/G: 500VDC/100MΩ | |
| Working temperature | -10℃~+50℃ | |
| Dimension | 65.5×125.2×100mm | |
Write your message here and send it to us
Related Products
-
YCB9-63 MCBlype lest current Tripping time Expected result Type Test current Tripping time Expected resut B,C,D 1.13In t≤1h(In≤63A Not tripping B 3In t≤0.1s Not tripping 1.13In t≤2h(In>63A) C 5In t≤0.1s B,C,D 1.45In t<1h(In≤63A) Tripping D 10In t≤0.1s 1.45In t<2h(In>63A) B 5In t<0.1s Tripping B,C,D 2.55In 1s<t<60s(In≤32A) Tripping C 0In t<0.1s 2.55In 1s<t<120s(In>32A) D 20In <0.1s ... -
CJX2-K AC ContactorGeneral CJX2-K series AC Contactor is suitable for using in the circuits the rated voltage up to 660V AC 50Hz or 60Hz, rated current up to 12A in AC-3 using category , for making & breaking, frequently starting & controlling the AC motor. The contactor is produced according to IEC 60947-4. Type Designation ... -
S-100W, S-120W Power SupplyS-100W S-100W Single output: power 100W Input voltage: 90~132VAC/180~264VAC by switch Technical data Model Specification S-100-5 S-100-12 S-100-18 S-100-24 S-100-36 S-100-48 DC output voltage, current 5V 0~20A 12V0~8.5A 18V0~5.5A 24V0~4.5A 36V0~3A 48V0~2A Wave and noise 75mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p Inlet wire stability ±0.5% ±0.3% ±0.2% ±0.2% ±0.2% ±0.2% Load ... -
TDGC2, TDGC2J, TSGC2, TSGC2J Voltage RegulatorGeneral This product is designed and developed with the international advanced compersation technology. It can keep the output voltage steady automatically when the network voltage is fluctuated or the load current is varied, which can ensure the consumer run smoothly. It has the advantage of large capacity, high efficiency, no waveform distortion, simple operation and maintenance, reliable running, full- capacity output under towe... -
ATDV-Y Time RelayItem No. Data Voltage DC12V-48V AC12V-380V 50HZ Power Consumption DC1.0W AC1.0VA Control Output 5A 220V AC Insulation Resistance DC500V 100MΩ Dielectric Strength BCC1500VAC BOC1000VAC Operating Temperature -10℃~50℃ Humidity 35%~85% Life Mech:107 Elec:10 3 Weight ≈210g Installing Hole Size 50×62mm ... -
YCISC8 32XPV PPhotovoltaic Isolator switch YCISC8-32 DC Isolation Switch General Cage type isolation switch YCISC8 series is suitable for DC power systems with rated voltage DC1200V and below and rated current 32A and below. This product is used for infrequent on/off, and can disconnect 1~2 MPPT lines at the same time. It is mainly used in the control cabinet, distribution box and combiner box of the photovoltaic power gene...
Copyright © 2022 CNC ELECTRIC GROUP CO.,LTD. All Rights Reserved.
Hot Products - Sitemap
3p Ac Mcb, Mpcb, 250amp Mccb Circuit Breaker, 6a Elcb, 3 Phase Starter, Mccb Microprocessor Based,
Hot Products - Sitemap
3p Ac Mcb, Mpcb, 250amp Mccb Circuit Breaker, 6a Elcb, 3 Phase Starter, Mccb Microprocessor Based,