DTS726 Three-phase Electronic Meter General The meter is used in three phase four wire power grid. The meter is designed to measure AC active energy. All of its functions comply with the relative technical requirement for class 1 three phase watt hour meter in IEC62053-21. It is a long life meter with the advantage of high stability, high over load capability, low power loss. Function 1. Mechanical step register 5+1(default) , 6 di...

DDSY726 Single Phase Prepayment Electronic Meter General The DDSY726 type single phase prepayment meter is a new type IC card prepayment meter which has such functions as power metering, load control and customer information management. It is an ideal product when reforming electric-use system, achieving electrical energy to commercialize, setting charge and adjusting load stage in the power network. It adopts LSI and SMT technolog...

DTS726D-7P Three-phase Din-rail Energy Meter General The meter is used in three phase four wire/three phase three wire/two phase three wire power grid. The meter is designed to measure AC active energy. It is a long life meter with the advantages of high stablity, high over load capablity, low power loss and small volume. Function 1. Mechanical step register or LCD display 2. Bi-directional total active energy measurement, total ac...

Basic Function 1. LCD display, touch button for LCD display step by step; 2. Bi-directional total active energy ,reverse active energy measure in the total active energy; 3. The meter also display real voltage, real current, real power, real power factor, real frequency, import active energy, export active energy; 4. Overvoltage protection ,overload protection; 5. Timing and delay control by mobile phone; 6. RS485 communication port, MODBUS-RTU protocol; 7. WIFI comm...

1.To prevent electric shock,the power must be off when wiring isto be carried out   2.Wiring shall be arranged directly according to ports. Please confirm whether allconnections are correct.   3.Use drag steering.   4.To reduce electromagnetic interference to electrical wires,equipment and wires shall be connected in suitable range with same size for shortest connection.   5.Wiring layout shall be away from any internal electromagnetic nterference source. 6.The cross secti...

Basic Function 1. LCD display with backlight; 2. Bi-directional total active energy, reverse active energy measure in the total active energy; 3. The meter also display real voltage, real current, real power, real power factor, real frequency, import active energy, export active energy; 4. Keypad for LCD display step by step 5. Reset energy function (the reset energy kWh display is dependent with the total energy display, this reset will not affect the total energy) ...