Solutions
Support
News
About Us
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
D4MC Limit Switch
Picture
D4MC Limit Switch
1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
Conatct Us
Product Details
Overall and mounting dimensions(mm)
Technical data
| Item | Data | ||||||||
| Load | AC 250V | 10A | |||||||
| AC 380V | 10A | ||||||||
| DC125V | 5A | ||||||||
| DC 250V | 5A | ||||||||
| Life | Mechanical | Fifteen million times | |||||||
| Electrical | Fiye hundred thousand times | ||||||||
| Operation speed | 0.05mm~0.5m/s | ||||||||
| Operation frequency | Mechanical | 120 times/min | |||||||
| Electrical | 20 times/min AC 250V | ||||||||
| Insulation resistance | 100MΩ DC500V | ||||||||
| Contact resistance | Under 15MΩ(Initial value) | ||||||||
| With stand voltage (50/60Hz 1min) |
Between the terminals of same pole |
AC 1000V | |||||||
| Between charged metal parts |
AC 2000V | ||||||||
| Between non-charged metal parts of each termina |
AC 3000V | ||||||||
| Vibration | Misoperation | 10-55Hz(amplitude 1.5mm) | |||||||
| Protection degree | IP63 | ||||||||
| Mode Operation speciality |
D4MC-5000 | D4MC-5020 | D4MC-5040 | D4MC-1020 | D4MC-1000 | D4MC-2000 | D4MC-2020 |
| OF (max) | 600g | 600g | 600g | 260g | 170g | 200g | 300g |
| RF (min) | 100g | 100g | 100g | 35g | 25g | 40g | 40g |
| PT (max) | 1.6mm | 1.6mm | 1.6mm | - | - | 10mm | - |
| OT (min) | 5mm | 5mm | 5mm | 2.5mm | 4mm | 5mm | 2mm |
| MD (max) | 0.2mm | 0.2mm | 0.2mm | 1.7mm | 3mm | 3mm | 1.5mm |
| FT (max) | - | - | - | 33mm | 36mm | 51mm | 47mm |
| OP (max) | 21.8±1.2mm | 33.4±1.2mm | 33.4±1.2mm | 25±1mm | 25±1mm | 40±1mm | 40±1mm |
Wiring diagram
D4MC-1020
D4MC-1000
D4MC-2020
D4MC-2000
D4MC-3030
D4MC-5000
D4MC-5020
D4MC-5040
Write your message here and send it to us
Data Download
Related Products
-
56.02 General-purpose RelayTechnical data Contact Rating 2Z Contact Resistance 50mΩ(1A6VDC ) Contact Capacity 10A/220VAC 30VDC Insulation Resistance 500MΩ, 500VDC Dielectric Strength BCC 1000VAC 1min BOC 1500VAC 1min CCC 1500VAC 1min Operating Time 25ms/25ms Terminal Type PCB and Socket ... -
YCQ7 Magnetic StarterOperation and Installation Condition Altitude:≤2000m Ambient air temperature:-5℃~+40℃, average temperature of 24 hours must below+35℃ Relative humidity: the maximum temperature of 40 degrees, the air relative humidity not exceed 50%, at a lower temperature can allow for a higher relative humidity. The wettest month’s average lowest temperature must be below 25℃, the max relative humidity of that month should not exceed 90%. If humidity changes as a result of occasi... -
LE1 Magnetic StarterOperation and installation condition 1. Ambient air temperature:-5℃~+40℃， average temperature of 24 hours must below +35℃ 2. Altitude:≤2000m 3. Relative humidity: The maximum temperature of 40 degrees,the air relative humidity not exceed 50%,at a lower temperature can allow for a higher relative humidity.The humidest month’s average lowest temperature must be below 25℃, the max relative humidity of that month should not exceed 90%.If humidity changes as a result of... -
CJX2-Z DC ContactorsCJX2-09~32Z Application CJX2-Z series DC operated contactor is suitable for use in the circuits up to rated voltage 660V DC 50Hz or 60Hz, and in rated current 9-95A in DC-3/380V load circuits. For remote controlling circuit making, breaking and frequent starting DC motors. It can also combine with the auxiliary contact g... -
YCQR2 Soft StarterFunctions of YCQR2 Soft Starter 1. Double Single-chip machine automatic digital control; 2. Parameters like starting torsion current, voltage, and time to be set according to different load, to obtain optimal torque control feature. 3. Smooth and gradual starting process, to reduce the impact strength of electric network, vibration and noise of apparatus, to lengthen lifetime of mechanical driver and to improve working environment. 4. Starting current is adj... -
CJX2-F AC ContactorGeneral CJX2-F series AC contactor is applied to circuits with AC 50Hz/60Hz, rated voltage up to 690V, rated current up to 800A. It is used for remote making & breaking circuits, and protect circuit from overload when assembling with thermal over-load relay. Standard: IEC 60947-4-1. Type Designation Operating Conditions 1. Ambient te...
Copyright © 2022 CNC ELECTRIC GROUP CO.,LTD. All Rights Reserved.
Hot Products - Sitemap
Mpcb, 6a Elcb, 3 Phase Starter, Mccb Microprocessor Based, 250amp Mccb Circuit Breaker, 3p Ac Mcb,
Hot Products - Sitemap
Mpcb, 6a Elcb, 3 Phase Starter, Mccb Microprocessor Based, 250amp Mccb Circuit Breaker, 3p Ac Mcb,