Projects
Solutions
Services
News
About Us
CJX2s AC three poles Contactor for ac
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
CJX2s AC three poles Contactor for ac
Product Overview
CJX2s series AC Contactor with novel appearance and compact structure is suitablefor using starting &controlling the AC motor frequently,switching on and off thecircuitat a long distance.It is used in combinationwith thermal relay to compose amagneticmotor starter
StandardIEC60947-1,IEC 60947-4-1.
Contact Us
Product Details
Product Overview
CJX2s series AC Contactor with novel appearance and compact structure is suitable for using starting & controlling the AC motor frequently, switching on and off the circuit at a long distance. It is used in combination with thermal relay to compose a magnetic motor starter.
Standard: IEC 60947-1, IEC 60947-4-1.
Specifications
Rated operation current(Ie): 9-95A;
Rated operation voltage(Ue): 220V~690V;
Rated insulation voltage: 690V； Poles: 3P;
Installation: Din rail and screw installation.
Operating and Installation Conditions
| Type | Operating and Installation Conditions |
| Installation category | III |
| Pollution level | 3 |
| Protection degree | CJX2s-09~38: IP20; CJX2s-40~95: IP10 |
| Ambient temperature | limit of temperature: -35℃~+70℃,normal temperature: -5℃~+40℃,The average no more than +35℃ within 24 hours. |
| Altitude | ≤2000m |
| Ambient temperature | The maximum temperature is 70 degrees, the relative humidity of the air does not exceed 50%, and the temperature below 50% can allow higher relative humidity. If the temperature is 20℃, the air relative humidity could up to 90%, Special measures should betaken for occasional condensation due to humidity changes. |
| Installation position | Inclination between installation surface and vertical surface should not exceed ±5° |
| Shock vibration | Products should be installed and used without significant shake, shock and vibration. |
Overall and Mounting
CJX2s-09~38
CJX2s-40~95
F4-D, LA2-D, LA3-D Contact Block
LX1-D Coil
Derived Products When The Contactor is Assembled With Following Accessory Module
F4-D, LA2-D, LA3-D Contact Block
LX1-D Coil
Derived Products When The Contactor is Assembled With Following Accessory Module
Specifications
| Appearance |  |
 |
 |
 |
|||||||||||
| Type | CJX2s-09 | CJX2s-12 | CJX2s-18 | CJX2s-25 | CJX2s-32 | CJX2s-38 | CJX2s-40 | CJX2s-50 | CJX2s-65 | CJX2s-80 | CJX2s-95 | ||||
| Main circuit characteristic | |||||||||||||||
| Poles | 3P | ||||||||||||||
| Rated insulation voltage(Ui) | V | 690 | |||||||||||||
| Rated operating voltage(Ue) | V | 380/400, 660/690 | |||||||||||||
| Rated thermal current(Ith) ，AC-1 | 20 | 20 | 32 | 40 | 50 | 50 | 50 | 60 | 80 | 125 | 125 | ||||
| Rated operation current(Ie) |
AC-3,380/400V | A | 9 | 12 | 18 | 25 | 32 | 38 | 40 | 50 | 65 | 80 | 95 | ||
| AC-3,660/690V | A | 6.6 | 8.9 | 12 | 18 | 22 | 22 | 34 | 39 | 42 | 49 | 49 | |||
| AC-4,380/400V | A | 3.5 | 5 | 7.7 | 8.5 | 12 | 14 | 18.5 | 24 | 28 | 37 | 44 | |||
| AC-4,660/690V | A | 1.5 | 2 | 3.8 | 4.4 | 7.5 | 8.9 | 9 | 12 | 14 | 17.3 | 21.3 | |||
| Rated operational power(Pe) |
AC-3,380/400V | kW | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 18.5 | 22 | 30 | 37 | 45 | ||
| AC-3,660/690V | kW | 5.5 | 7.5 | 10 | 15 | 18.5 | 18.5 | 30 | 33 | 37 | 45 | 45 | |||
| AC-4,380/400V | kW | 1.5 | 2.2 | 3.3 | 4 | 5.4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | |||
| AC-4,660/690V | kW | 1.1 | 1.5 | 3 | 3.7 | 5.5 | 6 | 7.5 | 10 | 11 | 15 | 18.5 | |||
| Mechanical life | 10000 times |
1200 | 1000 | 900 | 650 | ||||||||||
| Electrical life | AC-3 | 110 | 90 | 65 | |||||||||||
| AC-4 | 22 | 22 | 17 | 11 | |||||||||||
| Frequency of operation |
AC-3 | times/ hour |
1200 | 600 | |||||||||||
| AC-4 | 300 | 300 | |||||||||||||
| Connecting capability of main circuit terminal | |||||||||||||||
| Flexible wire | 1 wire mm² | 1…4 | 1.5…6 | 2.5…25 | 4…50 | ||||||||||
| No terminal | 2 wire | mm² | 1…4 | 1.5…6 | 2.5…16 | 4…25 | |||||||||
| Flexible wire | 1 wire | mm² | 1…4 | 1…6 | 2.5…25 | 4…50 | |||||||||
| With terminals | 2 wire | mm² | 1…2.5 | 1…4 | 2.5…10 | 4…16 | |||||||||
| Hard wire | 1 wire | mm² | 1…4 | 1.5…6 | 1.5…10 | 2.5…25 | 4…50 | ||||||||
| No terminal | 2 wire | mm² | 1…4 | 1.5… | 2.5…10 | 4…25 | |||||||||
| Fastening torque | N·m | 1.2 | 1.8 | 5 | 9 | ||||||||||
| Coil | |||||||||||||||
| Rated control voltage(Us) |
50Hz | V | 24、36、48、110、127、220/230、240、380/400、415、440 | ||||||||||||
| 50/60Hz | V | 24、36、48、110、127、220/230、240、380/400、415、440 | |||||||||||||
| Allowed control circuit voltage(Us) |
Operation | V | Installation inclination angle ±22.5°: 85%~110%Us； Installation inclination angle±5°: 70%~120% | ||||||||||||
| Release | V | Installation inclination angle ±22.5°: 20%~75%Us；Installation inclination angle±5°: 20%~65% | |||||||||||||
| Power consumption of coil |
Actuation | VA | 60 | 70 | 200 | 200 | |||||||||
| Keep | VA | 6-9.5 | 6-9.5 | 15-20 | 15-20 | ||||||||||
| Consumption | W | 1-3 | 1-3 | 6-10 | 6-10 | ||||||||||
| Auxiliary contacts | |||||||||||||||
| Auxiliary contacts specification | A | 11 | |||||||||||||
| Rated thermal current (Ith) | A | 10 | |||||||||||||
| Rated operating voltage (Ue) |
AC | V | 380 | ||||||||||||
| DC | V | 220 | |||||||||||||
| Rated control capacity |
AC-15 | VA | 360 | ||||||||||||
| DC-13 | W | 33 | |||||||||||||
| Certification CE, TUV, CB | |||||||||||||||
| Type | Amax | Bmax | Cmax | a | b | c | d | e | f |
| CJX2s-09, 12, 18 | 74.5 | 45.5 | 85.5 | 35 | 50/60 | - | - | - | - |
| CJX2s-25, 32, 38 | 83 | 56.5 | 97 | 40 | 50/70 | - | - | - | - |
| CJX2s-40, 50, 65 | 127.5 | 74.5 | 117 | - | - | 105 | 40 | 100/110 | 59 |
| CJX2s-80, 95 | 127.5 | 85.5 | 125.5 | - | - | 105 | 40 | 100/110 | 67 |
Write your message here and send it to us
Related Products
-
JSZW3 3kv 6kv 10kv Medium Voltage electricity t...This model voltage transformer is semi-casting type, with small size and good climate adaptability. The iron-core of the transformer applies core type side-iron structure, and made of high-quality silicon steel plate by cold rolling and exposing in the air, the primary winding, secondary winding and residual voltage winding wound onto theiron-core concentrically and cast with epoxy resin, the three phases cast and fixed together, the primary winding and terminal A is fully insulated and termi... -
YCB7-125 125A 1P Miniature Circuit BreakerType Standard IEC/EN 60947-2 IEC/EN 60898-1 Electrical features Rated current In A 63, 80, 100, 125 Poles P 1, 2, 3, 4 Rated voltage Ue V 230/400 Insulation voltage Ui V 500 Rated frequency Hz 50/60 Rated breaking capacity A 6000 Rated impulse withstand voltage(1.2/50) Uimp V 6000 Dielectric test voltage at ind. Freq. for 1min kV 2.5 Pollution degree 3 Thermo-magnetic release characteristic 8-12In B, C,D Mechanical features Electrical life t 1500 Mechanical... -
YCB6RL-100 How to install an RCCB with Electrom...General 1. Protection against the effects of sinusoidal alternating earth fault currents 2. Protection against indirect contacts and additional protection against direct contacts 3. Protection against fire hazard caused by insulation faults 4. Controlling and Switching 5. Used in residential building, non-residential building, energy sources, industry and infrastructure Release Type Tripping sensitivity data AC For residual sinusoidal alternating currents 30mA For personnel, ... -
YCC18 12 volt timer relayClassification Timer Model SUL180a SUL160a YCST8 YCC18 Appearance Contact capacity AC230 16(4)A AC220 16(4)A AC220 16A AC220 16A Full timing range 24h 24h 7min 20min Contact resistance ≤50mΩ ≤50mΩ ≤50mΩ ≤50mΩ Insulation resistance ≥100MΩ ≥100MΩ ≥100MΩ ≥100MΩ Coil voltage 110, 230V AC 110, 230V AC 110, 230V AC ... -
YCX8 Series DC pv combiner box for solar panelsResponsive 3D Model .sketchfab-embed-wrapper { position: relative; padding-bottom: 56.25%; /* 16:9 ratio */ height: 0; overflow: hidden; max-width: 100%; background: #000; } .sketchfab-embed-wrapper iframe { position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: ... -
HPRW How to install a 100A 200A Electrical Surg...Selection Operating conditions 1. Suitable for environments with an upper limit of 40 ℃ and a lower limit of -30 ℃. 2. Altitude not exceeding 1000m, wind speed not exceeding 35m/s 3. Fuses are not suitable for the following locations 3.1 Places with fuel or explosion hazards. 3.2 Places with severe vibration or impact. 3.3 Areas with abnormal electrochemical gas effects and severe air pollution and smoke Main technical parameter of polymer housed fuse Type Rated vol...
Official shop
Follow us
-
-
-
Address：CNC High-Tech Hutou Industrial Zone, Liushi Town, Yueqing, Wenzhou Ctity, China
Copyright © 2024 CNC ELECTRIC GROUP CO.,LTD. All Rights Reserved.
Hot Products - Sitemap - AMP Mobile
3 Phase Starter, Mpcb, 250amp Mccb Circuit Breaker, Mccb Microprocessor Based, 6a Elcb, 3p Ac Mcb,
Hot Products - Sitemap - AMP Mobile
3 Phase Starter, Mpcb, 250amp Mccb Circuit Breaker, Mccb Microprocessor Based, 6a Elcb, 3p Ac Mcb,
