Type designation Category Installation: Fixed type, draw out type. Operation: Motor-driven, hand. Main Technical Parameters Intelligent controller protection characteristic Definite setting and error for Intelligent Controller Note: L type intelligent controller setting with ☆ Over-current and earthing fault characteristic curve figure Secondary circuit wiring The circuit breaker has 40pcs terminal connector, please refer to picture1, picture2, picture3. Overall and Installation Dimens...

Product Structure General CJ19i contactor for capacitor switching (hereinafter called contactor) is suitable for the circuit of AC 50Hz/60Hz with rated rated voltage up to 690V. It is mainly used to add low voltage reactive power compensation equipment or cut off low voltage parallel capacitor. The contactor is equipped with a device to suppress the inrush current, which can effectively reduce the impact of the making inrush current on the capacitor and suppress the over-voltage when the...

General 1. Protection against overload and short-circuit currents. 2. Protection against the effects of sinusoidal alternating earth fault currents. 3. Protection against indirect contacts and additional protection against direct contacts. 4. Protection against fire hazard caused by insulation faults. 5. Used in residential building. 6. According to the type of instantaneous release classified as follows: type B(3-5)ln, type C(5-10)ln. Specifications Overall and Mounting Dimensions (mm)

Type designation 1. Rated current in scope of frame current 2000 Type-in: 630A, 800A, 1000A, 1250A, 1600A, 2000A; 3200 Type-in: 2000A, 2500A, 3200A; 6300 Type-in: 4000A, 5000A, 6300A; 2. Pole number 3-default, 4-4 pole 3. Installation Fixed type-horizontal, vertical Draw out type-horizonal, vertical Note: 2000 type have vertical wiring, others are horizontal wiring 4. Control unit L type-dial switch mode, over-current protection (overload, short delay, instantaneous). 2M type-digitaldisplay,o...

General 1. Overload protection 2. Short circuit protection 3. Controlling 4. Used in residential building, non-residential building, energy source industry and infrastructure. 5. According to the type of instantaneous release classified as follows: type B(3-5)ln, type C(5-10)ln, type D(10-20)ln Release Curve Specifications Overall And Mounting Dimensions(mm)

Scope Multi-stage selection switch is a versatile product, widely used in the control panel of CNC power switch. Power switch the use, because of their high voltage, high current, the combined use of gold and silver contacts on the control panel of CNC. On the use of power switch, because of their high voltage, high current, the combined use of gold and silver contacts on the control panel of CNC, because of their low voltage, low current, so you should use gold contacts, Since the differen...