Function and features 1. Measure active electric energy, no need of calibration for long-term operation; 2. Adopt dedication meter age chip ADE7755; 3. Adopt lasted electricity dedication integrated circuit including digital multiplier overseas, greatly improved dynamic working range of Meter, making 1 multiple actual overload; 4. Have a good mistake linearity at a range of 5%Ib~Imax; 5. Few periphery component, simple structure, low power consumption; 6. Adopt high reliability and long life ...

General CJX2-F series AC contactor is applied to circuits with AC 50Hz/60Hz, rated voltage up to 690V, rated current up to 800A. It is used for remote making & breaking circuits, and protect circuit from overload when assembling with thermal over-load relay. Standard: IEC 60947-4-1. Type Designation Operating Conditions 1. Ambient temperature: -5℃~+40℃; 2. Air conditions: At mounting site, relative humidity not exceed 50% at the maximum temperature of +40℃. F...

Characteristics / Application External Appearance Size

Basic Function 1. LCD display 5+1(default) or 4+2 kWh, Display; 2. Bi-directional total active energy measurement, reverse active energy measure in the total active energy; 3. Pulse LED indicates working of meter, Passive pulse output with optical coupling isolation; 4. Energy data can store in memory chip more than 15 years after power off; 5. 35mm din rail installation.

Working Conditions 1. Power capacitor should confirm left voltage reduce to rated voltage 10% to input again after the power was cut off, normally it will need 200s almost. so it would choose the power controller which has input and reput lock time function after cut off the power. If choose normally power controller, it must install speediness discharge power equipment. it would not limited which use adopting same electric factor input and chip switch. 2. Altitude level is not more than 200...

Technical data Overall and mounting dimensions(mm) Rated insulation voltage Ui: AC380V Rated control voltage: AC110V, AC220V, AC380V Usage category: Ue: AC110V/AC220V/AC380V; Ie: 6.5 A/ 3 A/ 1.9 A; Ith: 10 a; Ac-15 Protection degree: IP20 Pollution degree: 3 Load power: resistive load: 6kW; Inductive load: 1.8KW; Motor load: 1.2KW; Lamp load: 0.9KW Wiring diagram Wiring for direct control mode: direct control mode can be used for electrical apparatus which is single-phase phase power supply...