Operation and installation condition 1. Ambient air temperature:-5℃~+40℃， average temperature of 24 hours must below +35℃ 2. Altitude:≤2000m 3. Relative humidity: The maximum temperature of 40 degrees,the air relative humidity not exceed 50%,at a lower temperature can allow for a higher relative humidity.The humidest month’s average lowest temperature must be below 25℃,  the max relative humidity of that month should not exceed 90%.If humidity changes as a result of occasional gel generated,...

CJX2-09~32Z Application CJX2-Z series DC operated contactor is suitable for use in the circuits up to rated voltage 660V DC 50Hz or 60Hz, and in rated current 9-95A in DC-3/380V load circuits. For remote controlling circuit making, breaking and frequent starting DC motors. It can also combine with the auxiliary contact group, air delayer, thermal relay devices etc. Specifications Outline and Mounting Dimension CJX2-09~32Z CJX2-40~95Z

General 1. Overload protection 2. Short circuit protection 3. Controlling 4. Used in residential building, non-residential building, energy source industry and infrastructure. 5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln Release Curve Specifications Overall and Mounting Dimensions(mm)

Working Conditions 1. Power capacitor should confirm left voltage reduce to rated voltage 10% to input again after the power was cut off, normally it will need 200s almost. so it would choose the power controller which has input and reput lock time function after cut off the power. If choose normally power controller, it must install speediness discharge power equipment. it would not limited which use adopting same electric factor input and chip switch. 2. Altitude level is not more than 200...

Characteristics / Application External Appearance Size