Projects
Solutions
Services
News
About Us
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
China Best 225a Mccb Factory – JD-8 Motor Integrated Protector – CNC Electric
Picture
China Best 225a Mccb Factory – JD-8 Mot...
1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
Contact Us
Product Details
Operating conditions
- The altitude shall not exceed 2000m.
- The ambient air temperature is -5℃~+40℃ and the average temperature within 24h shall not exceed +35℃.
- Atmospheric condition: Relative humidity of atmosphere shall not exceed 50% at the temperature of +40℃,and higher relative humidity is allowed at lower temperature. For example, the air humidity can reach 90% at the temperature of +20℃. Regarding the condensation casually caused by humidity change, special measures shall be taken.
- Class of pollution: Class III
- Installation category: category III
- The angle between the installation surface and the vertical surface shall not exceed ±5 degrees.
- The place without obvious shake, impact and vibration shall be selected as the installation site.
- The installation site shall conform to the following standards: explosive and dangerous medium, no gas capable of corroding and damaging insulation in the medium and less conductive dust in the medium.
- The place with rain-proof and snow-proof equipment and a little water vapor shall be used as the installation site
Others
Structure characteristics
●Three-phase electronic type
●Function of phase failure and overload protection(not suitable for reversible motor)
●Device capable of continuously adjusting setting current
●The main circuit adopts pass-through-core type wiring method
●Installation method: installation via screws or rail
The protector has the following operating characteristics for load balance of each phase; the tripping level is level 30.
Write your message here and send it to us
Related Products
-
China Best Ewelink Smart Ac Panel Company ̵... -
China Best Light Switch On Brick Wall Factory &...Function and features 1. LCD display 6+2 2. Bi-directional total active energy measurement ,reverse active energy measure in the total active energy 3. Each user responds to a card , well protect from forgery 4. Once the electric consumption is used up , it should be cut off automatically 5. Auto cut-off for overload 6. The IC card power selling control system has the function as power selling and using control 7. Pulse LED indicates working of meter, Pulse output with optical coupling isolat... -
China Best Mccb Malaysia Factory – CJ19...Product Structure General CJ19i contactor for capacitor switching (hereinafter called contactor) is suitable for the circuit of AC 50Hz/60Hz with rated rated voltage up to 690V. It is mainly used to add low voltage reactive power compensation equipment or cut off low voltage parallel capacitor. The contactor is equipped with a device to suppress the inrush current, which can effectively reduce the impact of the making inrush current on the capacitor and suppress the over-voltage when the... -
China Best 3p 25a Mccb Factories – CJX2...General CJX2-F series AC contactor is applied to circuits with AC 50Hz/60Hz, rated voltage up to 690V, rated current up to 800A. It is used for remote making & breaking circuits, and protect circuit from overload when assembling with thermal over-load relay. Standard: IEC 60947-4-1. Type Designation Operating Conditions 1. Ambient temperature: -5℃~+40℃; 2. Air conditions: At mounting site, relative humidity not exceed 50% at the maximum temperature of +40℃. F... -
China Best 63 Rcbo Factories – YCZF6 Se...Meet the requirements of building electrical design code; Small size, automatic reset without manual operation; Cut off the circuit quickly and safely when the voltage fluctuation is too high or too low; Automatic re-closing and voltage loss trip function by detectiong voltage; With over voltage,under voltage,re-closing indicator state; Low power consumption and long service life. Normal Operating Conditions and Mounting Conditions Ambient temperature: -35°~70°C Altitude: ≤3000M Atmospheric c... -
China Best 25a Mcb Company – YCB9-63 MC...General 1. Overload protection 2. Short circuit protection 3. Controlling 4. Used in residential building, non-residential building, energy source industry and infrastructure. 5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln Release Curve Specifications Overall and Mounting Dimensions(mm)
Copyright © 2022 CNC ELECTRIC GROUP CO.,LTD. All Rights Reserved.
Hot Products - Sitemap
250amp Mccb Circuit Breaker, 6a Elcb, 3p Ac Mcb, Mccb Microprocessor Based, 3 Phase Starter, Mpcb,
Hot Products - Sitemap
250amp Mccb Circuit Breaker, 6a Elcb, 3p Ac Mcb, Mccb Microprocessor Based, 3 Phase Starter, Mpcb,